Product Name: 304 / 316 stainless steel double ferrule ball valve
Product model: QGY1
Connection mode: thread, compression ferrule
Structural features: ferrule type at both ends
Product material: stainless steel 304 / 316
Thread standard: G, NPT, BSPT, BSP, DIN
Ferrule size: Ф6、Φ8、Ф10、Φ12、Ф14、Φ16、Ф18、Φ20、Ф22
Product pressure: ≤ 6.4 MPa
Operating temperature: ≤ 120 ℃
Medium used: water, oil, weak corrosive medium, etc
Handle material: 304, 201
Handle color: red, blue, yellow
Product Description:
304 / 316 stainless steel double ferrule ball valve has the characteristics of pressure corrosion, firm connection, high pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation, etc. Widely used in food, pharmaceutical, petrochemical, electric power, water treatment, metallurgy and other industrial pipelines and civil automatic control industries.
Nominal pressure: 2.5MPa, 16MPa.
Applicable temperature: ≤ 150 ℃.
Applicable media: oil, water, gas and other non corrosive or corrosive media.
Manufacturing materials: 20#, 1Cr18Ni9Ti, 304, 316, 316L.
Piping: Ф 4~ Ф 42 ordinary grade precision seamless steel pipe.
Taper pipe thread: ZG, R, G, Pt, NPT, etc.
Structural drawing of 304 / 316 stainless steel double ferrule ball valve:
304 / 316 stainless steel double ferrule ball valve connection size:
Components | Material | standard |
handle | WCB silver-plated gray | |
Top wire | SCM435 | DIN916-1980 |
Stem | 316、304 | GB/T1220-1992 |
Gasket | 316、304 | GB/T1220-1992 |
Sealing ring | RPTFE | HG2-535 |
Guide seat | 316、304 | GB/T1220-1992 |
Sealing cap | RPTFE | HG2-535 |
Back mother | 316、304 | GB/T1220-1992 |
Valve body | 316、304 | GB/T1220-1992 |
Front card holder | 316L、304 | GB/T1220-1992 |
Rear card sleeve | 316、304 | GB/T1220-1992 |
Single card holder | 316、304 | GB/T1220-1992 |
Nuts | 316、304 | GB/T1220-1992 |
304 / 316 stainless steel double ferrule ball valve connection size:
Port Size | Orifice in (mm) | Cv | Dimensions(mm) | ||||
L | L1 | W | H | F1 | |||
6mm | 0.281 (7.1) | 2.3 | 2.63 (66.8) | 1.50 (38.1) | 3/4 (19.05) | 1.18 (30) | 3.22 (82.0) |
8mm | |||||||
10mm | 2.87 (72.9) | 2.87 (72.9) | 7/8 (22.23) | ||||
12mm | 0.354 (9.0) | 6.4 | 3.15 (8.0.8) | 1.83 (46.5) | 15/16 (24.0) | 1.54 (39) | 3.22 (82.0) |
1/4〞 | 0.281 (7.1) | 2.3 | 2.63 (66.8) | 1.50 (38.1) | 3/4 (19.05) | 1.18 (30) | 3.22 (82.0) |
5/16〞 | |||||||
3/8〞 | 2.87 (72.9) | 2.87 (72.9) | 7/8 (22.23) | ||||
5/8〞 | 0.354 (9.0) | 6.4 | 3.15 (80.8) | 1.83 (46.5) | 15/16 (24.0) | 1.54 (39) | 3.22 (82.0) |
ZDLPF电动衬氟调节阀标准规格: 阀体型式:直通铸造球型衬···
1、止回阀选型说明: 止回阀一般适用于清净介质,不宜用于含有···
DH44W/H旋启式低温止回阀主要用于低温液体贮运设备的管理···
衬氟产品分类:衬氟直管即在钢制管道内衬氟,分有模压型钢衬四氟···
阀门种类多、品种复杂,主要有闸阀、截止阀、节流阀、蝶阀、旋塞···
概述低温截止阀是指关闭件(阀瓣)沿阀座中心线移动的阀门。根据···
截止阀适用于对流体阻力要求不严的管路上,以及高温、高压介质的···
石化阀门微泄漏型式试验方法、试验程序、结果评价和评定范围,论···
1、安全阀的强度试验与其他阀门一样,是用水作试验的。试验阀体···
焊接锻钢止回阀有三种阀盖设计,一种是螺栓型阀盖,通过凹凸面连···